Lenz LS100 Switch Module 4 Points/Signals Feedback (11100)

Contact Mail Order Hotline on 01453 825381 or email to enquiries@antics.ltd.uk

Secure Ordering &
Free UK Delivery
for orders over £30.00 (more)

> Digital Command Control (DCC) > Lenz DCC Accessories

Lenz LS100 Switch Module 4 Points/Signals Feedback (11100)
The accessory decoder receives the commands send by the central command station through the power module and, for example, controls the switch machines on your turnouts (or the other devices). The commands are initiated from your input devices, such as the Basic Hand Held LH100, the Tower Cab LW100, the Computer Interface LI100 or the command station converter module LC100 (in connection with an Arnold or Märklin Digital system). The accessory decoder LS100/LS110 are equipped with 4 outputs, with 3 terminals (+,C,-) each. These outputs can be connected to 4 twin-coil switch machines (or twin-coil actuators for your signals).

Up to 4 function devices each with a twin output can be connected to each LS100/LS110. Power for these function devices can by supplied by the track power or through an external power supply. Each function device output can have its characteristics individually set (by programming). In this way you can program each output with a variable pulse duration, a variable flashing operation or to a constant operation,. This allows the direct connection of lightbulbs or LEDs without additional relays. The LS100 also has a connection for the feedback bus of the DIGITAL plus system. If the feedback bus is connected, then the position of turnouts can be sent back to the system when using suitable turnout drives. It is then possible to display a turnout being thrown by either DCC or by hand.

> Digital Command Control (DCC) > Lenz DCC Accessories