Gaugemaster Model WS - Walkabout Unit with Inertia (WS)

Contact Mail Order Hotline on 01453 825381 or email to enquiries@antics.ltd.uk

Secure Online Ordering.
Free Mainland UK delivery
for orders over £40.00 (more)

> Electrics & Power Controllers > DC Power Controllers

This section contains 12V DC analogue controllers that are suitable for model loco's that are not fitted for digital control. Analogue controllers work by controlling the voltage sent to the track - the higher the voltage the higher the speed and have a nominal maximum of 12v. Normally, one controller can control several tracksas long as just one loco' is in operation. If two are required to runn at the same another controlled output fis required.

We have a separate section specifically for DCC Digital Command Control users

Gaugemaster Model WS - Walkabout Unit with Inertia (WS)

Single Track Walkabout Controller with simulation for ‘N’, ‘OO’ and most small Gauges
Input: 1 x 16v A.C. at 1.25 amps Requires T1, M1 Transformer, or 100M Controller
Output: 1 x 12v D.C. at 1 amp controlled
Measurements: 109mm x 59mm x 20mm deep
Fitted with 1.5 metres of 4 core cable

Unit is similar to Model W but has simulation which is operated by a wheel control on the side of the unit. The simulation can be switched on or off as required. Speed is controlled by the control knob and the direction changes by 3 position centre off switch.

> Electrics & Power Controllers > DC Power Controllers