more | Train Control Systems 1.5 Volt Regulator Board (VR1.5-H)
A 1.5-volt volttage regulator add-on for??use with many TCS??DCC decoders to permit existing 1.5-volt??lighting circuits to be retained. Max input voltage 13v. Output 1.5v, 120ma.more.. | |
more | Train Control Systems DP2X Plug-In Two Function Locomotive Decoder (DP2X)
The easiest decoder fitting yet! This direct plug-in decoder with an integral 8-pin plug, no wire harness, no soldering.
This is the standard??version of the DP2X decoder, with the integrated 8-pin plug fitted crosswise.
Ideal for locomotives with limited decoder space, this decoder is only a little larger than the standard blanking plugs!
Output rating 1.3-amp, 2.0-amp peak motor drive
Two 100mA function outputs
Length 22mm, Width 18mm, Height 4.5mm. Integrated 8-pin plug fitted crosswise. more.. | |
more | Train Control Systems T1 DCC Decoder with Lead (T1)
A budget priced two function decoder with 9-pin plug and wiring harness for locomotives not fitted with DCC sockets.
Even this??low price??decoder still incorporates TCS's slow speed dither control and quiet drive functionality.
1.3A continuous 2A peak motor output. Two 100mA function outputs. Connection - wire
Measures 26 x 16 x 4mm more.. | |
more | Train Control Systems T4X Decoder "X Series" (T4X)
1.3A continuous 2A peak motor output. Four 100mA function outputs. Board measures 28mmx17mmx6mm height
Four-function??decoder with 9-pin wiring harness.more.. | |
more | Train Control Systems T5X Decoder "X Series" (T5X)
1.3A continuous 2A peak motor output. Five??100mA function outputs. Board measures 27mmx17mmx6mm height
Five function decoder with nine pin JST plug and wiring harness for locomotives not fitted with DCC sockets.more.. | |
more | Train Control Systems T6X Decoder "X Series" (T6X)
1.3A continuous 2A peak motor output. Six 100mA function outputs. Board measures 27mmx18mmx4mm height
Six-function??decoder with 9-pin wiring harness, plus two hard wired lines for the additional functions. Suitable for locomotives with lots of extra controllable features, eg fan motor, left and right headlights, marker lights etc.more.. | |
more | Train Control Systems M1P-UK Micro Decoder (M1P-UK)
1A continuous 2A peak motor output. Two 100mA function outputs. Board measures 14mmx9mmx4mm height.
A micro decoder designed to fit N gauge locomotives this decoder has??enough power capacity for an average OO/HO locomotive. Ideal??for fitting to small locomotives with very restricted space without losing any??weight. Supplied with UK specification harness and plug.more.. | |
more | Train Control Systems MC2P-MH Micro Decoder (MC2P-MH)
1A continuous 2A peak motor output. Two 100mA function outputs. Board measures 18mm x 10.5mm x 5mm height.
A micro decoder designed to fit N gauge locomotives this decoder has??enough power capacity for an average OO/HO locomotive. Ideal??for fitting to small locomotives with very restricted space without losing any??weight.more.. | |
more | Train Control Systems M3P-UK Micro Decoder (M3P-UK)
1A continuous 2A peak motor output. Three 100mA function outputs. Board measures 14mmx9mmx4mm height.
A micro decoder designed to fit N gauge locomotives this decoder has??enough power capacity for an average OO/HO locomotive. Ideal??for fitting to small locomotives with very restricted space without losing any??weight. Supplied with UK specification harness and plug.more.. | |
more | Train Control Systems M3P-LH Micro Decoder with 7" harness (M3P-LH)
1A continuous 2A peak motor output. Three 100mA function outputs. Board measures 14mmx9mmx4mm height.
A micro decoder designed to fit N gauge locomotives this decoder has enough power capacity for an average OO/HO locomotive. Ideal for fitting to locomotives with very restricted space without losing any weight. Fitted with an extra-long 175mm/7in wiring harness, ideal for locomotives where the decoder must be located away from the motor, eg. in a tender or smokebox.more.. | |
more | Train Control Systems M3P-SH Micro Decoder (M3P-SH)
1A continuous 2A peak motor output. Three 100mA function outputs. Board measures 14mmx9mmx4mm height.
A micro decoder designed to fit N gauge locomotives this decoder has enough power capacity for an average OO/HO locomotive. Ideal for fitting to small locomotives with very restricted space without losing any weight. Supplied with a short wiring harness just 30mm (1¼in) long and 8-pin plug. | |
more | Train Control Systems M4P-UK Micro Decoder (M4P-UK)
1A continuous 2A peak motor output. Four 100mA function outputs. Board measures 14mmx9mmx4mm height.
A micro decoder designed to fit N gauge locomotives this decoder has??enough power capacity for an average OO/HO locomotive. Ideal??for fitting to small locomotives with very restricted space without losing any??weight. Supplied with UK specification harness and plug.more.. | |
more | Train Control Systems M4 Micro Decoder "X Series" (M4)
1A continuous 2A peak motor output. Four 100mA function outputs. Board measures 18mmx10mmx4mm height
A hard wired micro decoder designed to fit N gauge locomotives, this decoder has??enough power capacity for an average OO/HO locomotive. Ideal??for fitting to small diesel and electric locomotives with lighting and??restricted space without losing any??weight.more.. | |
more | Train Control Systems MC2 Micro Decoder "X Series" (MC2)
1A continuous 2A peak motor output. Two 100mA function outputs. Board measures 18mmx10mmx4mm height
Designed to fit N gauge locomotives this decoder has??enough power capacity for an average OO/HO locomotive. Ideal??for fitting to small locomotives with very restricted space without losing any??weight. Fitted with??a miniature 7-pin harness connector and wiring harness. more.. | |
more | Train Control Systems MC4 Micro Decoder "X Series" (MC4)
1A continuous 2A peak motor output. Four 100mA function outputs. Board measures 18mmx10mmx4mm height
Designed to fit N gauge locomotives this decoder has??enough power capacity for an average OO/HO locomotive. Ideal??for fitting to small locomotives with very restricted space without losing any??weight. Fitted with??a miniature 7-pin harness connector and wiring harness.more.. | |
more | Train Control Systems MC6 Micro Decoder "X Series" (MC6)
1A continuous 2A peak motor output. Six 100mA function outputs. Board measures 18mmx10mmx4mm height
Designed to fit N gauge locomotives this decoder supplies??enough power for an average OO/HO locomotive and still features??six function outputs! Ideal??for??small diesel locomotives with lighting circuits, this decoder will??fit restricted spaces without losing any??weight. Fitted with??a miniature 7-pin harness connector and wiring harness.more.. | |
more | Train Control Systems Long Harness for MC Series Decoder 7" (MC-LH)
A 7-inch long harness with plugs to connect a MC series decoder with a standard NMRA 8-pin socket. This allows you to select the a length of wiring harness best suited to each??model. | |
more | Train Control Systems DP5X Board Mounted Decoder X Series (DP5X)
A very simple to install decoder, you plug the actual decoder board into the DCC socket! Rated at??1.3amps continuous with 2 amps peak for motor drive there are five function outputs available. Two functions can provide??250ma, the remaining three outputs are 100ma. some connections needing to be made using solder pads on the decoder board.
Board measures 0.845in/21.5mm length, 0.680in/17.3mm width and 0.165in/6mm height. more.. | |
more | Train Control Systems W5X Decoder "X Series" (W5X)
1.3A continuous 2A peak motor output. Five??100mA function outputs. Board measures 25mmx17mmx4mm height
A thin hard wired five function decoder??for locomtives not fitted with DCC socketsmore.. | |
more | Peco Introducing DCC - Shows You How (SYH17)
An inexpensive guide to the basics of Digital Command Control, this booklet provides an???overview of DCC, from its objectives to the technology and systems available.???Written as a primer for modellers taking their first steps with digital command control many of???your DCC questions are answered and explained. | |
Railways
Search
Index
Checkout
Back