OO9 Dundas Kits

Pastic kits of OO9 wagons and coaches
from the Dundas range

Useful longer wheelbase underframe for narrow gauge wagons
Supplied with 9mm gauge wheelsets on long axles suitable for regauging up to 12mm gauge.
£10.65
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 79621)
Cookies are disabled.
To place an order please call 01453 377030
Model kit of the Tralee & Dingle Railway covered van. These vans were designed to allow cattle loading but were used for general goods traffic wshen not needed for cattle service.
Supplied with 12mm gauge wheelsets. Wheels can easily be adjusted to 9mm gauge.
£17.40
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 37896)
Cookies are disabled.
To place an order please call 01453 377030

Lifiting loop couplers as fitted to ready-to-run OO9, HOe and HOm narrow gauge model railway rolling stock. These couplers are designed to be able to be fitted in the coupler pockets of N gauge chassis and can be glued to the ends of kit-built models.

£5.75
Warehouse: 2
Bristol: 1
Fast delivery from Warehouse.
(Product Ref 94584)
Cookies are disabled.
To place an order please call 01453 377030
The NEM355 coupler pocket has become a standard fitting for N gauge models and Peco have fitted these to their new OO9 coaches and wagons, allowing couplings to be changed easily.
This pack allows couplers to be fitted to slate wagons where couplers are supplied for the end wagons only and to adapt N gauge underframes and bogies for use under OO9 wagons.
4 couplers per pack.
£5.75
Warehouse: 4
Fast delivery from Warehouse.
(Product Ref 4793)
Cookies are disabled.
To place an order please call 01453 377030

These handy NEM355 type coupling pockets are ideal for use in conjunction with our GR-102 Couplers, and allow modellers to attach the coupling to any other type of vehicle, such as a scratch-built or kit-built wagon. The two halves of the pocket are simply glued together and then mounted to the wagon. The GR-102 Coupler can be inserted and removed as required.
Although produced with 00-9 in mind, there is no reason why these couplers and coupling pockets could not be used on other scales including N.

Supplied in packs of 8.

Please note that this pocket is designed for fixed body mounting of couplers. This will allow standard N gauge couplers to be fitted but may not be suitable for use with couplers relying on lateral displacement for some functionality, eg. delay action on Dapols' Easi-Shunt knuckle couplers.

£6.96
Warehouse: 7
Fast delivery from Warehouse.
(Product Ref 84246)
Cookies are disabled.
To place an order please call 01453 377030
Pair of Pecos' Lynton & Barnstaple Railway pattern OO9 narrow gauge coach bogies.
Supplied as a set of bogie mouldings with axles, couplers and pivot boss for fitting beneath the coach the bogies can be assembled in a few minutes.
Ideal for quickly fitting bogies to scratch and kit built/bashed coaches.
£7.75
Warehouse: 7
Fast delivery from Warehouse.
(Product Ref 50875)
Cookies are disabled.
To place an order please call 01453 377030
Nicely detailed kit building a model of one of the Snailbeach District Railways ore and aggregate hopper wagons.
The stock of the Snailbeach District Railways was laterly almost entirely owned by the well-known light railway specialist Colonel Stephens. Two WD Baldwin 4-6-0 engines were used on this line.
£7.85

Must be ordered - delivery as soon as possible.
(Product Ref 53384)
Cookies are disabled.
To place an order please call 01453 377030

Nicely detailed kit building a model of the Snailbeach District Railways coal wagon.
This is a basic style open wagon as used by the Snailbeach District Railways and typical of the simple wood construction open wagons which might have supplied as a standard design to any narrow gauge line.

£7.85

Must be ordered - delivery as soon as possible.
(Product Ref 79468)
Cookies are disabled.
To place an order please call 01453 377030
Parkside plastic assembly kit building a model of the Vale of Rheidol railways' passenger coaches. These coaches are comparable in size to the Lynton & Barnstaple stock, providing the option for variation in passenger rolling stock for a narrow gauge model railway

These twelve identical bogie coaches were built for the opening of the railway in 1902. All twelve when built were 7 compartment 3rd class coaches, open above the seat backs, however, as the need arose some were converted to other uses. 2 coaches were converted into open 3rd class coaches by having their sides stripped above the waist and two large windows cut in each end.
This kit contains updated side and roof mouldings and can be easily converted into the later modified semi-open version.
£18.10

Must be ordered - delivery as soon as possible.
(Product Ref 5389)
Cookies are disabled.
To place an order please call 01453 377030
Pack of low-backed passenger coach seats
£2.50

Must be ordered - delivery as soon as possible.
(Product Ref 65753)
Cookies are disabled.
To place an order please call 01453 377030

Plastic assembly kit building a model of the Lynton and Barnstaple Railways' 4-wheel open wagons in original condition with flap type side doors.

£11.35

Must be ordered - delivery as soon as possible.
(Product Ref 64055)
Cookies are disabled.
To place an order please call 01453 377030

Plastic assembly kit building a model of the Lynton and Barnstaple Railways' 4-wheel open wagons in later condition with side hung cupboard type side doors.

£10.10

Must be ordered - delivery as soon as possible.
(Product Ref 109303)
Cookies are disabled.
To place an order please call 01453 377030

Plastic assembly kit building a model of the Lynton and Barnstaple Railways' 4-wheel covered goods van.

£10.10

Must be ordered - delivery as soon as possible.
(Product Ref 109304)
Cookies are disabled.
To place an order please call 01453 377030
Plastic kit building a model of the Vale of Rheidol narrow gauge brake van.
Kits are a good source for adding models not available ready-to-run. Narrow gauge lines often bought builders standard wagon designs, so this kit can easily be adapted for a fictitious narrow gauge line.
£12.45

Must be ordered - delivery as soon as possible.
(Product Ref 79467)
Cookies are disabled.
To place an order please call 01453 377030

A detailed plastic kit building a model of the WW1 War Department class D bogie open wagon.

Many thousands of these wagons were built, being suitable for carrying most types of stores from ammuniton to rations and even able to be fitted to carry stretchers for the evacuation of the wounded.
After the end of the war these wagons were bought by narrow gauge railways and industrial operators, the full-length drop-side design being suitable for all types on minerals including coal and aggregate. The wagons were also purchased for use on large farm estates, including the potato farms operated by Smiths crisps.
While this wagon will be produced in a ready-to-run form by Bachmann kit building allows for greater variations to be recreated by altering the pieces during construction.

£13.65

Must be ordered - delivery as soon as possible.
(Product Ref 87510)
Cookies are disabled.
To place an order please call 01453 377030

A detailed plastic kit building a model of the WW1 War Department class E bogie open wagon with lower central well floor.

Similar to the more numerous D class the E class featured a lowered floor between the bogies forming a well suitable for carrying taller loads or for light weight loads like hay for horses. It appears both soldiers and later railway operators found these wagons rather inconvenient to use, the design of the upper drop doors leaving a bar along the side at floor level, preventing easy loading and unloading of the well section. While many found post-war buyers, it appears these were only used if no alternative wagons were available!
Bachmann are producing a model of the more common D class wagons, this kit offers an alternative to add variety to a wagon fleet. Kit building also allows the builder to alter a model during construction, either in prototype fashion to model a wagon with the well area boarded over, or more drastic alterations to create a side-less well wagon, or with sides altered to give full height doors hinged from the bottom of the well area.

£13.65

Must be ordered - delivery as soon as possible.
(Product Ref 76789)
Cookies are disabled.
To place an order please call 01453 377030
These two coaches were built by the Festiniog Railway in the early preservation era using chassis from Hudson bogie flat wagons with bogies similar to the WW1 designs.

A number of narrow gauge railways had coaches built on former wagon chassis, often in the same semi-open style, including lines built to serve quarries and military depots, where passenger service was added later and coaches were built from stock on hand.
£15.20

Must be ordered - delivery as soon as possible.
(Product Ref 6416)
Cookies are disabled.
To place an order please call 01453 377030
Pack of 5 steel sided slate wagons modelled from Festiniog Railway prototypes. Slate wagons of similar design were used by all of the Welsh slate railways.
£32.95

Must be ordered - delivery as soon as possible.
(Product Ref 109305)
Cookies are disabled.
To place an order please call 01453 377030
Plastic kit building a pair of WW1 type Hudson 4-wheel bogies.
The kit supplies parts to build these as single bolster wagons and a H girder load is supplied.

This kits can be used to build two of the WW1 wagon bogies for use under a wagon or coach, or to construct a pair of single bolster wagons. Single bolster wagons were usually worked as a pair and used to haul long loads like steel sections and timber by using the load itself as the connection between the bogies. A number of these wagons were used by the military services for logging operations during both world wars.
£13.15

Must be ordered - delivery as soon as possible.
(Product Ref 90580)
Cookies are disabled.
To place an order please call 01453 377030

Intended to provide covered vans for the conveyance of supplies to the front line and be quickly converted to return with wounded soldiers on stretchers these vans quickly proved unsuitable for service on the rough track of the WW1 front line trench railways. The vans were put to good use at supply depots where the track was better maintained and later on agricultural railways which made use of the readily available ex-WD wagons.

£15.20

Must be ordered - delivery as soon as possible.
(Product Ref 109306)
Cookies are disabled.
To place an order please call 01453 377030
Plastic kit building a model of a saloon type 4 wheel coach with central door based on a coach operated by the Glyn Valley Tramway.
Kits are a good source for adding models not available ready-to-run. Narrow gauge lines often bought builders standard wagon designs, so this kit can easily be adapted for a fictitious narrow gauge line.
£11.90

Must be ordered - delivery as soon as possible.
(Product Ref 109307)
Cookies are disabled.
To place an order please call 01453 377030
Plastic kit building a model of a 2 compartment 4 wheel coach based on coaches operated by the Glyn Valley Tramway.
Kits are a good source for adding models not available ready-to-run. Narrow gauge lines often bought builders standard wagon designs, so this kit can easily be adapted for a fictitious narrow gauge line.
£11.90

Must be ordered - delivery as soon as possible.
(Product Ref 109308)
Cookies are disabled.
To place an order please call 01453 377030

The stone carrying Ashover Light Railway modified its' former WW1 War Department drop-floor type E wagons to have a full-length level floor at the standard height. The wagons could still be identified as they retained a central drop door instead of the two-part drop side design of the type D wagons.

£13.65

Must be ordered - delivery as soon as possible.
(Product Ref 109309)
Cookies are disabled.
To place an order please call 01453 377030
This kit builds a model of the later steel bodied open wagons supplied to contractors and industrial narrow gauge lines by Robert Hudson Ltd. The robust construction of these wagons have ensured these are often found on preserved lines.


£10.10

Must be ordered - delivery as soon as possible.
(Product Ref 7689)
Cookies are disabled.
To place an order please call 01453 377030
Parkside plastic kit building a model of the slat-sided wood bodied open wagons built by the Hudson company for the RAF and used in many ammunition depots, leading to the type being widely known as the 'bomb truck'.


£10.10

Must be ordered - delivery as soon as possible.
(Product Ref 3329)
Cookies are disabled.
To place an order please call 01453 377030
Robert Hudson Ltd of Leeds was one of the main suppliers of narrow gauge equipment in the United Kingdom, supplying a standard range of rolling stock suitable for temporary contractors lines and industrial railways.
This kit builds a model of the early (inter-war) wooden bodied open wagons supplied by the Hudson company as general use open wagons. developed from the experience of WW1 service demands these wagons were light enough to be pushed by hand, but with underfarmes suitable for locomotive haulage. A large number were built and many have survived for further service on preserved lines.
£10.10

Must be ordered - delivery as soon as possible.
(Product Ref 73326)
Cookies are disabled.
To place an order please call 01453 377030
Plastic kit building a model of an open-sided 2 compartments based on coaches operated by the Glyn Valley Tramway.
Kits are a good source for adding models not available ready-to-run. Narrow gauge lines often bought builders standard wagon designs, so this kit can easily be adapted for a fictitious narrow gauge line.
£11.90

Must be ordered - delivery as soon as possible.
(Product Ref 109310)
Cookies are disabled.
To place an order please call 01453 377030

Plastic assembly kit building a model of a small 4 wheel covered goods van based on the vans owned by the Glyn valley Tramway.

£10.10

Must be ordered - delivery as soon as possible.
(Product Ref 109311)
Cookies are disabled.
To place an order please call 01453 377030

Plastic assembly kit building a model of a small 4 wheel open wagon with end door based on wagons owned by the Vale of Rheidol Railway.

£10.10

Must be ordered - delivery as soon as possible.
(Product Ref 109312)
Cookies are disabled.
To place an order please call 01453 377030
A pack of 5 of the Hudson V form side tipping or skip wagons.
 
These wagons were the primary type used by contractors and aggregate railways, making this pack of 5 an excellent way to make a 'train' for a small steam or diesel locomotive.
The wagons could be emptied quickly and easily by releasing the locking mechanism and pushing the top of the skip to over-balance it, dumping the load. Ideal for shifting earth and aggregates, even delivering ready-mixed cement!

The sand pits around Leighton Buzzard, now the home of the Leighton Buzzard narrow gauge heritage railway, operated a vast fleet of these wagons to move sand between the pits and sidings alongside the LMS mainline. Most narrow gauge railways have some of these wagons around for engineering service.
£32.65

Must be ordered - delivery as soon as possible.
(Product Ref 45291)
Cookies are disabled.
To place an order please call 01453 377030

Plastic assembly kit building a model of the Welsh Highland Heritage Railways' 'Bro Madog Eisteddfod' coach.

This coach has been built by the Welsh Highland Heritage Railway in recent years using the traditional method of adapting a wagon underframe and constructing a passenger coach body onto it. The result is a coach of a typical narrow gauge style with match-boarded sides riding on Hudson type wagon bogies. Like all kits the coach can easily be modified during construction to create a design unique to an alternative model narrow gauge line.

£18.10

Must be ordered - delivery as soon as possible.
(Product Ref 2758)
Cookies are disabled.
To place an order please call 01453 377030
Pack of 5 Glyn Valley Tramway 4 ton mineral wagon kits. These simple 4 wheel wagons were built to carry the stone quarries from the Glyn Valley to the canal and railway wharfs in Chirk. The wagons were a simple and robust design with a full-length drop side door. The top plank was fixed, increasing the strength and rigidity of the body.
£38.95

Must be ordered - delivery as soon as possible.
(Product Ref 48952)
Cookies are disabled.
To place an order please call 01453 377030
Plastic kit building a coach modelled on the coaches of the Festiniog and Blaenau Railway.
These coaches had an unusual arrangement of a central compartment flanked by half-compartments at each end. This allowed the wheels to be accommodated beneath the seats allowing the coach floor to be lower than a more conventional two-compartment coach.
Kits are a good source for adding models not available ready-to-run. Narrow gauge lines often bought builders standard designs, so this kit can easily be adapted for a fictitious narrow gauge line.
£11.90

Must be ordered - delivery as soon as possible.
(Product Ref 109313)
Cookies are disabled.
To place an order please call 01453 377030
Plastic kit building a coach modelled on the coaches of the Festiniog and Blaenau Railway.
These coaches had an unusual arrangement of a central compartment flanked by half-compartments at each end. This allowed the wheels to be accommodated beneath the seats allowing the coach floor to be lower than a more conventional two-compartment coach. If desired one end compartment can be reserved for the guard to create a brake coach.
Kits are a good source for adding models not available ready-to-run. Narrow gauge lines often bought builders standard designs, so this kit can easily be adapted for a fictitious narrow gauge line.
£11.90

Must be ordered - delivery as soon as possible.
(Product Ref 109314)
Cookies are disabled.
To place an order please call 01453 377030
Plastic kit building models of the very basic quarrymens coaches operated by the Festiniog Railway for the quarry workers who lived away from the quarrys and travelled daily or weekly from their homes.
Kits are a good source for adding models not available ready-to-run. Narrow gauge lines often bought builders standard wagon designs, so this kit can easily be adapted for a fictitious narrow gauge line.
£11.90

Must be ordered - delivery as soon as possible.
(Product Ref 109315)
Cookies are disabled.
To place an order please call 01453 377030
Robert Hudson Ltd of Leeds was one of the main suppliers of narrow gauge equipment in the United Kingdom, supplying a standard range of rolling stock suitable for temporary contractors lines and industrial railways.

This kit builds a model of the later (post WW2) steel bodied bogie open wagons, an update of the earlier wooden bodied D type wagons from WW1. A large number of these wagons were built to replace the ex-WW1 wagons in industrial use. The robust construction of these wagons have ensured many have found homes in the engineers fleets of preserved lines. kit features the 1950s type Hudson bogies.
£13.65

Must be ordered - delivery as soon as possible.
(Product Ref 84084)
Cookies are disabled.
To place an order please call 01453 377030
Pair of Peco L&B Type Archbar Wagon Bogies
These wagon bogies are those found on the Lynton & Barnstaple 8 ton bogie open wagons, but would be very useful for modellers wishing to place them under their own scratch-built models.  Supplied in a pack containing 2 bogies, 2 couplers and two pairs of disc wheel axles, they can be constructed very quickly, being a clip-fit assembly.
A 4mm diameter hole is required in the floor, with a maximum floor thickness of 1.5mm.
£7.75

Must be ordered - delivery as soon as possible.
(Product Ref 1902)
Cookies are disabled.
To place an order please call 01453 377030
Have a question? Contact us

The  Dundas range of plastic kits cover a wide variety of coaches and wagons used on narrow gauge lines in the UK. We are listing a selection of useful kits, concentrating on stock suitable for use with the Lynton & Barnstable rolling stock from Peco and Hejlan and wagons used by the British military services suitable for use with the forthcoming Bachmann WW1 locomotives and stock.

We do not normally stock these items but can obtain them quickly to complete orders. Delivery in 10-14 days can be expected.