Coach and Wagon Parts

Detail parts and replacement trucks and chassis kits
Bachmann 36-005A 00 Gauge MkI Bogies - Pair

MkI Bogies (2) to suit Bachmann Mk1 coaches

£14.95
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 34248)
Cookies are disabled.
To place an order please call 01453 377030
48 springs, sized perfectly for zero friction addition when used to add power pickup on 2.0mm axles (OO and HO standard size).  They are a delight to use. – Simply remove one wheel, add the spring and replace the wheel-set, making sure you note which wheel is ‘live’ to the track. Drill a small hole in the floor of the coach/tender/caboose etc, and solder a bit of fine wire to the tag end on the spring. Connect the wire to your flickerfree or loco pickups etc. You will be delighted these friction-free pickups. They will add nothing to the drag at all and will always be able to give perfect pickup as long as you keep track and wheels reasonably clean.
£16.95
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 116012)
Cookies are disabled.
To place an order please call 01453 377030
3x beautifully crafted scale sized modern EOT lamp complete with 3 full sets of onboard electronics for lamp flash, featuring the ability to automatically turn on/turn off and ready for accessory decoder connection too. Easy mounting with a simple rear pin. Super-fine 0.12mm wire for an almost invisible connection
£24.95
Warehouse: 3
Bristol: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 115305)
Cookies are disabled.
To place an order please call 01453 377030
Pack of six replacement track cleaning pads for the Hornby R296 track cleaning coach.
£2.99
Warehouse: 8
Fast delivery from Warehouse.
(Product Ref 75941)
Cookies are disabled.
To place an order please call 01453 377030
This chassis kit is based on the late LMS 10 ft wheelbase chassis design and includes two sets of solebars allowing the kit to be built with either LMS J hanger suspension, or the usual simpler wagon suspension system. This choice provides a useful kit for altering kits to represent wagons built on alternative chassis.
The J hanger suspension was often used on wagons for perishable traffics which were expected to travel at higher passenger train speeds, so the kit includes vacuum brake fittings and 8-shoe clasp type brakes.
Scale frame length 17ft 6in used for LMS and British Railways general merchandise open wagons and covered box vans. Wheels and bearings required to complete.

£4.95
Warehouse: 3
Fast delivery from Warehouse.
(Product Ref 105640)
Cookies are disabled.
To place an order please call 01453 377030
Fine chain with 13 links per inch, total lnetgh approx. 1 yard (910mm).
Suitable for finishing heavy loads and containers chained down to wagons.
£2.95
Warehouse: 3
Bristol: 1
Fast delivery from Warehouse.
(Product Ref 105643)
Cookies are disabled.
To place an order please call 01453 377030
Fine chain with 9 links per inch, total length approx. 1 yard (910mm).
Suitable for finishing heavy loads and containers chained down to wagons.
£2.95
Warehouse: 2
Fast delivery from Warehouse.
(Product Ref 105644)
Cookies are disabled.
To place an order please call 01453 377030
Pair of diamond frame type wagon bogies.
Wheels and bearings required to complete.
£5.50
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 28587)
Cookies are disabled.
To place an order please call 01453 377030
Plastic kit containing 2 underframe kits from the former Ratio range LNWR wagons with wood solebars.
This useful wood underframe kit has been produced under the Ratio banner for many years and has now been merged with the Parkside wagon kits range.
£6.75
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 32317)
Cookies are disabled.
To place an order please call 01453 377030
Peco R-35 00 Gauge Peaked Roof for Lime Wagon - Set of 2

Pre-formed peaked roof moulding designed to provide weather protection for lime wagons based on the 7-plank open wagon design.

£2.20
Warehouse: 5
Fast delivery from Warehouse.
(Product Ref 67018)
Cookies are disabled.
To place an order please call 01453 377030
Peco R-36 00 Gauge Salt Wagon Peaked Roof - Pack of 2

Pre-formed peaked roof moulding designed to provide weather protection for  salt wagons based on the 7-plank open wagon design.

£2.20
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 67017)
Cookies are disabled.
To place an order please call 01453 377030
Peco R-37 00 Gauge Box Van Roof - Set of 2

Pre-formed roof moulding designed to use with Peco containers and suitable for many box vans.

£2.20
Warehouse: 3
Fast delivery from Warehouse.
(Product Ref 64369)
Cookies are disabled.
To place an order please call 01453 377030
£24.95

Gloucester: 1
Delivery from stores takes a few days longer!
(Product Ref 116024)
Cookies are disabled.
To place an order please call 01453 377030
Springside DA20/5SR 00 Gauge SR Train Tail Lamps - pack of 5

Pack of five Southern Raiwlay design train tail lamps with jewel reflectors.

£4.75

Must be ordered - delivery as soon as possible.
(Product Ref 90838)
Cookies are disabled.
To place an order please call 01453 377030
The LNER Thompson bogies have been retooled in 2018 with updates to the standards of detailing and now incorporating electrical pickups for powering interior lighting.
£14.95

Must be ordered - delivery as soon as possible.
(Product Ref 34250)
Cookies are disabled.
To place an order please call 01453 377030
Bachmann 36-008A 00 Gauge Pair of BR Commonwealth design coach bogies, as used on Mk.1 passenger coaches.
£14.95

Must be ordered - delivery as soon as possible.
(Product Ref 34252)
Cookies are disabled.
To place an order please call 01453 377030
Bachmann 36-010 00 Gauge Collett Coach Bogies Pack of 2

Pair of GWR bogies as used under Bachmanns' Collett design coaches.

£14.95

Must be ordered - delivery as soon as possible.
(Product Ref 34253)
Cookies are disabled.
To place an order please call 01453 377030
Bachmann 36-024 00 Gauge LMS Coach Bogies - Pair

Pair of LMS design bogies as used under Bachmanns' LMS period 1 coaches.

£14.95

Must be ordered - delivery as soon as possible.
(Product Ref 34262)
Cookies are disabled.
To place an order please call 01453 377030
Bachmann 36-037 00 Gauge B4 Coach Bogies - Pair  for Mk1 & Mk2 coaches
£14.95

Must be ordered - delivery as soon as possible.
(Product Ref 34266)
Cookies are disabled.
To place an order please call 01453 377030
Trestle load support set.
Trestle supports were fitted to bolster and plat wagons to allow flat loads like sheet metal to be carried at an angle, allowing a sheet wider than the wagon to be fitted into the loading gauge.
£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 105633)
Cookies are disabled.
To place an order please call 01453 377030
Bolster support set.
Pair of bolster supports as fitted to long-wheelbase twin bolster and bogie bolster wagons. Bolsters were used to support long flexible loads including timber and steel angle. A large number of 'lowfit' wagons (eg Parkside kit PC66) were paired up and fitted with bolsters in the British Railways era to supplement the available bolster wagons.
£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 105634)
Cookies are disabled.
To place an order please call 01453 377030
Chassis kit for a 10 ft wheelbase wagon with LNER brake rigging and 8-shoe clasp brakes. Vacuum brake cylinder supplied so the kit can be constructed as a fitted or unfitted chassis.
Scale frame length 17ft 6in used for most general service merchandise open wagons and covered vans built from the mid-1920s onwards. Wheels and bearings required to complete.

£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 105637)
Cookies are disabled.
To place an order please call 01453 377030
Chassis kit for the British Railways 9ft wheelbase underframe used for the unfitted 16 ton mineral wagons with Morton lever hand brake only.
Scale frame length 16ft 6in used for mineral wagons and gunpowder vans. Wheels and bearings required to complete.

£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 57582)
Cookies are disabled.
To place an order please call 01453 377030
Chassis kit for the RCH 9ft wheelbase underframe used under steel bodied mineral wagons built before the introduction of the solid W irons by British Railways. These wagons had bottom drop doors the brakes on each side were worked independently, known as double brake. Can be used with Parkside mineral wagon kit bodies to model Ministry of Transport wagons ordered during WW2.
Scale frame length 16ft 6in mostly used for mineral wagons. Wheels and bearings required to complete.

£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 105638)
Cookies are disabled.
To place an order please call 01453 377030
Chassis kit for the British Railways 10ft wheelbase underframe used for the BR standard designs of open merchandise wagons and covered box vans. This kit is supplied with vacuum brake fittings and 4-shoe Morton lever hand brakes and can be constructed in either vacuum braked or unfitted format.
Scale frame length 17ft 6in used for British Railways general merchandise open wagons and covered box vans. Wheels and bearings required to complete.

£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 105639)
Cookies are disabled.
To place an order please call 01453 377030
Chassis kit for the British Railways 12ft wheelbase underframe used for long 4-wheeled wagons like the 20 to 24 ton capacity mineral wagons, plate and twin bolster wagons. Kit builds an unfitted chassis with Morton hand brake levers.
Scale frame length 21ft 6in. Wheels and bearings required to complete.
£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 105636)
Cookies are disabled.
To place an order please call 01453 377030
Pack includes parts to make a pair of LNWR 8-feet wheelbase bogies, as used under the former Ratio range LMS / LNWR coaches.
£8.50

Must be ordered - delivery as soon as possible.
(Product Ref 121751)
Cookies are disabled.
To place an order please call 01453 377030
Pack includes parts to make a pair of these Bar Frame type bogies as included in the GW Bolster A kit (Ref 562) and the LMS Bogie Iron Ore Wagon (Ref 571). Kit includes bolster, wheels and tension lock couplings; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
£5.50

Must be ordered - delivery as soon as possible.
(Product Ref 32351)
Cookies are disabled.
To place an order please call 01453 377030
Pack includes parts to make a pair of these heavy duty design bogies that feature cast steel type sideframes. Kit includes bolster, wheels and tension lock couplings; supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
£5.50

Must be ordered - delivery as soon as possible.
(Product Ref 32352)
Cookies are disabled.
To place an order please call 01453 377030
LNER DX type open container
Along with the familiar box containers introduced in the 1920s a large number of open container types were designed for conveying loads not requiring weather protection.
Containers offered the ability to shift loads quickly between road and rail transport without reloading. Special container flat (conflat) wagons were built with tie-down rings for securing the containers, however containers were frequently seen being carried in conventional open wagons, secured with ropes around the wagon buffers and tarpaulin lashing points.
£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 105635)
Cookies are disabled.
To place an order please call 01453 377030
BR FM type covered box container to diagram 3/201.
The FM type containers were insulated and designed for carrying chilled meat and other pre-chilled produce.
Containers offered the ability to shift loads quickly between road and rail transport without reloading. Special container flat (conflat) wagons were built with tie-down rings for securing the containers, however containers were frequently seen being carried in conventional open wagons, secured with ropes around the wagon buffers and tarpaulin lashing points.
£5.50

Must be ordered - delivery as soon as possible.
(Product Ref 105641)
Cookies are disabled.
To place an order please call 01453 377030
BR BD type covered box container to diagram 3/050
The type BD containers were one of the most common general service types. These basic containers were used for the wide range of goods and products which don't need any special fittings other than protection from the weather and are well known for their association with the railways' furniture removals service.
Containers offered the ability to shift loads quickly between road and rail transport without reloading. Special container flat (conflat) wagons were built with tie-down rings for securing the containers, however containers were frequently seen being carried in conventional open wagons, secured with ropes around the wagon buffers and tarpaulin lashing points.
£5.50

Must be ordered - delivery as soon as possible.
(Product Ref 105642)
Cookies are disabled.
To place an order please call 01453 377030
Chassis kit for a 10 ft wheelbase wagon with LNER brake rigging and 8-shoe clasp brakes. Vacuum brake cylinder supplied so the kit can be constructed as a fitted or unfitted chassis.
Scale frame length 17ft 6in used for most general service merchandise open wagons and covered vans built from the mid-1920s onwards. Wheels and bearings required to complete.

£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 105646)
Cookies are disabled.
To place an order please call 01453 377030
Chassis kit for the British Railways 10ft wheelbase underframe used for the BR standard designs of open merchandise wagons and covered box vans. This kit is supplied with vacuum brake fittings and 4-shoe Morton lever hand brakes and can be constructed in either vacuum braked or unfitted format.
Scale frame length 17ft 6in used for British Railways general merchandise open wagons and covered box vans. Wheels and bearings required to complete.

£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 105645)
Cookies are disabled.
To place an order please call 01453 377030
Supplied with pre-coloured parts although painting can add realism. Seat sections are supplied as long extruded parts and will need cutting to the length required to fit compartments.
This pack contains enough seating for an 8 compartment coach - 520mm.
£5.50

Must be ordered - delivery as soon as possible.
(Product Ref 32341)
Cookies are disabled.
To place an order please call 01453 377030
This chassis kit recreates the standard RCH 10-foot wheelbase chassis, used extensively after 1930 and forming a good basis for modelling many traditional wagon types built by BR.
This is the chassis used for the Ratio GWR ventilated box van and MOGO motor car van, which have all now been merged into the Parkside range.
£6.75

Must be ordered - delivery as soon as possible.
(Product Ref 32310)
Cookies are disabled.
To place an order please call 01453 377030
Dapol WCHASS10 00 Gauge 10ft Wagon Chassis

10-foot wheelbase wagon chassis with wheels, buffers and couplers.

£6.45

Must be ordered - delivery as soon as possible.
(Product Ref 69025)
Cookies are disabled.
To place an order please call 01453 377030
Have a question? Contact us