This section contains 12V DC analogue controllers that are suitable for model loco's that are not fitted for digital control. Analogue controllers work by controlling the voltage sent to the track - the higher the voltage the higher the speed and have a nominal maximum of 12v. Normally, one controller can control several tracksas long as just one loco' is in operation. If two are required to runn at the same another controlled output fis required.
Hornby Replaced by C990 Wall Mounted Transformer 16V - 13VA (C912 / R964) Standard 16v AC wall mounted plug top transformer unit. This is the power supply for Hornby R965 train controller and Scalextric racing powerbase controllers.
Bachmann Analogue Controller with Accessory Output & UK Transformer (44212)
A 12-volt DC single track controller, supplied with a plug-top mains power transformer. Outputs from the controller are 12-volts DC controlled track power from train speed control and 16-volts AC uncontrolled to supply accessories such as point motors. The controller has a large knob for speed control and a long flat slide switch for direction control, making running the trains easy and fun for children and adults alike.
Gaugemaster Model 100M - Single Controller 12v DC 16v AC 1 amp (100M) Single Track Transformer Controller for ‘N’, ‘OO’ and most small Gauges Input: Mains (240 volts A.C.) use 3 amp fuse Output: 1 x 12v D.C. at 1 amp uncontrolled for accessories 1 x 12v D.C. controlled at 1 amp 1 x 16v A.C. at 1 amp for accessories 1 x 16v A.C. DIN Socket for Gaugemaster handheld units (HH,W and WS) Measurements: 148mm x 90mm x 125mm deep
Gaugemaster Model Q - Four Track Controller (Q) Four Track Transformer Controller for ‘N’, ‘OO’ and most small Gauges Input: Mains (240v A.C.) use 3amp fuse Output: 4 x 12v D.C. at 1 amp each controlled 2 x 16v A.C. at 1 amp for accessories 2 x 12v D.C. at 1 amp uncontrolled for accessories Measurements: 208mm x 90mm x 147mm deep
Gaugemaster Model T4 - Transformer 2x 12v AC/1 amp (T4) Open Construction Transformer Input: Mains (240v A.C.) use 3 amp fuse Requires own mains lead & plug to be fitted Output: 2 x 12v A.C. at 1.25 amps (for lighting, Z gauge etc.) Requires own wires and cutouts as necessary
Gaugemaster Model UD - Twin Track Controller (Panel Mounted) (UD)
Twin Track Panel Mount Controller for ‘N’, ‘OO’ and most small Gauges Input: 2 x 16v A.C. at 1.25 amps each Requires T1, M1 Transformer Output: 2 x 12v D.C. at 1 amp each controlled Measurements: Panel: 120mm x 105mm x 28mm deep Aperture: 92mm x 83mm x 25mm deep
Gaugemaster Model M1 - Cased Transformer 2x16v AC/1amp (M1) Mains Transformer - fully cased, plugged and output protected with circuit breakers Input: Mains (240v A.C.) use 3 amp fuse Output: 2 x 16v A.C at 1 amp each Measurements: 99mm x 75mm x 65mm
Antics on-line with model shops in: Stroud (HQ), Bristol, Cardiff, Gloucester, Guildford, Plymouth, Worcester and Coventry. We stock a full range which includes plastic kits, radio control cars, diecast models, railways, planes and boats etc. Click on the links under "Available to buy now" or any picture in order to start shopping. Offers subject to availability. E&OE.
Railways
Search
Index
Checkout
Back