more | Gaugemaster Model LT. '00' Locomotive Tester and Controller. (Model LTOO)
This single output controller is ideal for static testing of a loco on integral, adjustable roller sets or moving tests on layout tracks. The loco is set down onto the adjustable roller assemblies, with each wheel engaging into its roller assembly. With the selector switch set to ‘test’ the control knob is used to apply power to the rollers. The ammeter will register the power consumption of the loco. Moving tests under load – gradients, heavy trains etc. – can be made with the selector switch set to ‘track’ whilst the unit is connected to a layout. In this mode the LT can of course be used as a conventional controller with a full 1 amp available at the 12v D.C. controlled output as well as the 16v A.C. output for accessories. | |
more | Gaugemaster Model 100 - Panel Mounted Single Track Controller (100)
Single Track Panel Mount Controller for small gauges up to ‘OO’ . Input: 1 x 16v A.C. at 1.25 amps Requires T1, M1 transformer
Output: 1 x 12v D.C. at 1 amp controlled
Measurements: Panel: 70mm x 105mm x 28mm deep
Aperture: 43mm x 83mm x 25mm deep | |
more | Gaugemaster Model UQ - Four Track Controller (Panel Mount) (UQ)
Four Track Panel Mounted Controller for ‘N’, ‘OO’ and most small Gauges
Input: 4 x 16v A.C. at 1.25 amps each Requires 2x T1 or 2x M1 Transformer
Output: 4 x 12v D.C. at 1 amp each controlled
Measurements: Panel: 217mm x 105mm x 28mm deep
Aperture: 84mm x 190mm x 25mm deep | |
more | Gaugemaster Model W - Walkabout Unit (W)
Single Track Walkabout Controller for ‘N’, ‘OO’ and most small Gauges
Input: 1 x 16v A.C. at 1.25 amps Requires T1, M1 Transformer, or 100M Controller
Output: 1 x 12v D.C. at 1 amp controlled
Measurements: 109mm x 68mm x 20mm deep
Fitted with 1.5 metres of 4 core cable | |
more | Gaugemaster Model SF - Single Track Controller with Feedback (SF)
Single Track Transformer Controller
with Feedback for most small Gauges
Input: Mains (240v A.C.) use 3 amp fuse
Output: 1 x 12v D.C. at 1 amp controlled
1 x 12v D.C. at 1 amp uncontrolled for accessories
1 x 16v A.C. at 1 amp for accessories
Measurements: 115mm x 90mm x 150mm deep
Not recommended for use with coreless design motors | |
more | Gaugemaster Model 100MO - Single Track O Gauge Controller (100MO)
Single Track Transformer Controller for ‘O' Gauge
Input: Mains (240 volts A.C.) use 3 amp fuse
Output: 1 x 12v D.C. at 1 amp uncontrolled for accessories
1 x 12v D.C. controlled at 2.5 amp
1 x 16v A.C. at 1 amp for accessories
Measurements: 148mm x 90mm x 125mm deep
| |
more | Gaugemaster Model P - Single Track Controller with Simulator (P)
Single Track Transformer Controller with Simulation for ‘N’, ‘OO’ and most small Gauges
Input: Mains (240 volts A.C.) use 3 amp fuse
Outputs: 1 x 12v D.C. at 1 amp controlled, with Simulator
1 x 12v D.C. at 1 amp uncontrolled for accessories
1 x 16v A.C. at 1 amp for accessories
Measurements: 148mm x 90mm x 125mm deep | |
more | Gaugemaster Model Select - Single Track Controller (SELECT)
Single Track Transformer Controller designed to maximise slow running capabilities for ‘N’, ‘OO’ and most Gauges
Input: Mains (240v A.C.) use 3 amp fuse
Output: 1 x 12/17v D.C. at either 1 amp or 0.3 amp controlled
1 x 24v A.C. at 1 amp uncontrolled for accessories
Measurements: 148mm x 90mm x 115mmmore.. | |
more | Gaugemaster Model DF Twin Track with Feedback (DF)
Twin Track Transformer Controller with Feedback for most small Gauges
Input: Mains (240 volts A.C.) use 3 amp fuse
Output: 2 x 12v D.C. at 1 amp each controlled
1 x 16v A.C. at 1 amp for accessories
1 x 12v D.C. at 1 amp uncontrolled for accessories
Measurements: 115mm x 90mm x 150mm deep
Not recommended for use with coreless design motors | |
more | Gaugemaster Model DS - Twin Track Controller with Simulator (DS)
Twin Track Transformer Controller with Simulation for ‘N’, ‘OO’, and most small Gauges
Input: Mains (240 volts A.C.) use 3 amp fuse
Output: 2 x 12v D.C. at 1 amp controlled,
both with Simulator 2 x 16v A.C. at 1 amp for accessories
2 x 12v D.C. at 1 amp uncontrolled for accessories
Measurements: 208mm x 90mm x 147mm deep
Simulator can be switched on or off as required | |
more | Gaugemaster Model TS - Three Track Controller with Simulator (TS)
Three Track Transformer Controller with Simulation on one track for ‘N’,’OO’ and most small Gauges
Input Mains (240 volts A.C.) use 3 amp fuse
Output: 1 x 12v D.C. at 1 amp controlled, with simulator
2 x 12v D.C. at 1 amp each controlled
2 x 16v A.C. at 1 amp for accessories
2 x 12v D.C. at 1 amp uncontrolled for accessories Measurements: 208mm x 90mm x 147mm deep
Simulator can be switched on or off as required | |
more | Gaugemaster Model UF - Single Track Controller with Feedback (Panel Mounted) (UF)
Single Track Panel Mounted Controller with Feedback for most small Gauges
Input: 1 x 16v A.C. at 1.25 amps Requires T1, M1 transformer
Output: 1 x 12v D.C. at 1 amp controlled
Measurements: Panel: 65mm x 90mm x 15mm deep
Aperture: 45mm x 70mm x 15mm deep
Not recommended for use with coreless design motor
| |
more | Gaugemaster Model U - Single Track Controller with Simulator (Panel Mounted) (U)
Single Track Panel Mount Controller with simulation for ‘N’, ‘OO’ and most small Gauges
Input: 1 x 16V A.C. at 1.25 amps Requires T1,M1 transformer
Output: 1 x 12v D.C. at 1 amp controlled, with simulator
Measurements: Panel 120mm x 105mm x 28mm deep
Aperture: 92mm x 83mm x 25mm deep | |
more | Gaugemaster Model UDS - Twin Track Controller with Simulator (Panel Mounted) (UDS)
Twin Track Panel Mount Controller with simulation for ‘N’, ‘OO’ and most small Gauges
Input: 2 x 16v A.C. at 1.25 amps Requires 2x T1 or 2x M1 Transformers
Output: 2 x 12v D.C. at 1 amp each controlled, both with simulator
Measurements: Panel: 217mm x 105mm x 28mm deep
Aperture: 84mm x 190mm x 25mm deep
Simulator can be switched on or off as require | |
more | Gaugemaster Model UTS - Three Track Controller with Simulator (Panel Mounted) (UTS)
Three Track Panel Mounted Controller with simulation on one track for ‘N’,’OO’ and most small gauges
Input: 3 x 16v A.C. at 1.25 amps each Requires 2x T1 or 2x M1 Transformers
Output: 1 x 12v D.C. at 1 amp controlled, with simulator
2 x 12v D.C. at 1 amp each controlled
Measurements: Panel: 217mm x 105mm x 28mm deep
Aperture: 84mm x 190mm x 25mm deep
Simulator can be switched on or off as required | |
more | Gaugemaster Model WS - Walkabout Unit with Inertia (WS)
Single Track Walkabout Controller with simulation for ‘N’, ‘OO’ and most small Gauges
Input: 1 x 16v A.C. at 1.25 amps Requires T1, M1 Transformer, or 100M Controller
Output: 1 x 12v D.C. at 1 amp controlled
Measurements: 109mm x 59mm x 20mm deep
Fitted with 1.5 metres of 4 core cable
more.. | |
stock
info | Gaugemaster 6 Pin Din socket and plug. For Model 'W' walkabout (GM75)
| |
more | Gaugemaster Model T3 -Transformer 1x 24v AC/1.25amps (T3)
Open Construction Transformer
Input: Mains (240v A.C.) use 3 amp fuse
Requires own mains lead & plug to be fitted
Output: 1 x 24v A.C. at 1.25 amps (for CDU)
Requires own wires and cutouts as necessary | |
more | Gaugemaster Open Transformer 2x 12v DC 1amp (T1DC)
| |
more | Gaugemaster Model M2 - Cased Transformer 1x 18v AC/2.5amps (M2)
Mains Transformer - fully cased, plugged and output protected with circuit breakers
Input: Mains (240v A.C.) use 3 amp fuse
Output: 1 x 18v A.C at 2.5 amps
Measurements: 99mm x 75mm x 65mm | |
more | Gaugemaster Model M3 - Cased Transformer 1x 24v AC/1.25amps (M3)
Mains Transformer - fully cased, plugged and output protected with circuit breakers
Input: Mains (240v A.C.) use 3 amp fuse
Output: 1 x 24v A.C at 1.25 amps
Measurements: 99mm x 75mm x 65mm | |
more | Gaugemaster Model M4 - Cased Transformer 2x 12v AC/1.25amps (M4)
Mains Transformer - fully cased, plugged and output protected with circuit breakers
Input: Mains (240v A.C.) use 3 amp fuse
Output: 2 x 12v A.C at 1.25 amps
Measurements: 99mm x 75mm x 65mm | |
more | Gaugemaster Model M5 - Cased Transformer 1x 12v AC/5amps (M5)
Mains Transformer - fully cased, plugged and output protected with circuit breakers
Input: Mains (240v A.C.) use 3 amp fuse
Output: 1 x 12v A.C at 5 amps
Measurements: 99mm x 75mm x 65mm | |
more | Gaugemaster Model M6 - Cased Transformer 1x 24v AC/2.5amps (M6)
Mains Transformer - fully cased, plugged
and output protected with circuit breakers
Input: Mains (240v A.C.) use 3 amp fuse
Output: 1 x 24v A.C at 2.5 amps | |
more | Gaugemaster Model SS1 - Super Shuttle (SS1)
A time controlled unit which can be used with any controller and stops a locomotive at a point on a line, reverses it and then stops it again at a second point, reversing the locomotive again. This repeats indefinitely. The duration of each sequence can be adjusted from approx 20-70 seconds.
Input: 16v A.C. at a maximum of 1.25 amps Requires T1, M1 Transformer
Measurements: 109mm x 68mm x 20mm | |
more | Gaugemaster Model PCU1 point control unit with integral CDU (Model PCU1)
| |
more | Gaugemaster Model PCU2 - Point Control Slave Unit (PCU2)
Slave Point Control Unit for use with most Gauges
Input: From PCU-1 or a CDU
Output: As PCU-1 and can be extended to another PCU-2
Specification: Point Control Unit for up to 42 Points for use with PCU-1
Can also be used with T3 Transformer and a CDU
Measurements: Box: 110mm x 55mm x 20mm
Overall: 110mm x 53mm x 39mm
| |
more | Gaugemaster Model SS2 - Station Stop Unit (SS2)
A small unit providing an automatic stop and start facility which only requires one reed switch to be installed.
The locomotive decelerates for about 5 seconds after passing factory set. The time stopped can be adjusted from approx 20-70 seconds, the rate of deceleration is also adjustable.
Reed switch and magnet are included.
Input: 16v A.C. at a maximum of 1.25 amps Requires T1, M1 Transformer
Measurements: 109mm x 68mm x 20mm | |
stock
info | Gaugemaster Model 10 (10LGB)
| |
Model Railways
Search
Index
Checkout
Back